1 power entry modules without line filter 6136 https://www.schurter.com /pg05 connectors iec appliance inlet c20 with circuit breaker ta35 1-pole see below: approvals and compliances c20 70 c description - panel mount : snap-in version from front side - 2 functions : appliance inlet , protection class i , circuit breaker type ta35 , 1-pole - quick connect terminals 6.3 x 0.8 mm characteristics - unwired - switch non-illuminated or illuminated - suitable for use in equipment according to iec/ul 60950 other versions on request - pre-wired version - quick connect terminals 4.8 x 0.8 mm - protection class ii, 70c references alternative: version for 10 a (15 a) 6135 substitute for type 1624-k weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, accessories, detailed request for product, microsite newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 16 a / 250 vac; 50 hz ratings ul/csa 20 a / 250 vac; 60 hz dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation tempe - rature -25 c to 60 c ip-protection from front side ip 40 acc. to iec 60529 insulation cover suitable for appliances with protection class i acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet/-outlet c20 acc. to iec 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 16 a, protection class i circuit breakers acc. iec/en 60934, ul 1077, csa 22.2 no. 235 1-pole rocker switch, illuminated or non- illuminated. conditional short circuit inc: 2000 a approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals
2 power entry modules without line filter 6136 https://www.schurter.com /pg05 connectors approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: 6136 approval logo certificates certification body description vde approvals vde certificate number: 40025196 ul approvals ul ul file number: e96454 cqc approvals cqc ccc certificate number: 2015180204000153 product standards product standards that are referenced organization design standard description designed according to iec 60320-1 appliance couplers for household and similar general purposes designed according to iec 60127-6 miniature fuses. part 6. fuse-holders for miniature fuse-links designed according to iec 61058-1 switches for appliances. part 1. general requirements designed according to ul 498 standard for attachment plugs and receptacles designed according to csa c22.2 no. 42 general use receptacles, attachment plugs, and similar wiring devices application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. micrositev-lock schurter ag v-lock system are based on a matching plug-dose combination. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset.
3 power entry modules without line filter 6136 https://www.schurter.com /pg05 connectors dimensions [mm] r 3 43.2 +0.2 0 50.8 +0.2 0 max. r 2 s 53.6 10.6 7 30.5 3 0.05 19 1.5 43 x 50.6 46 diagrams non-illuminated l n pe pe' l' p 1 4 n' 1) 2) ta 35 1) line 2) load illuminated (connection n' to l) l n pe pe' l' p 1 4 n' 1) 2) l ta 35 1) line 2) load
4 power entry modules without line filter 6136 https://www.schurter.com /pg05 connectors
5 power entry modules without line filter 6136 https://www.schurter.com /pg05 connectors
6 power entry modules without line filter 6136 https://www.schurter.com /pg05 connectors packaging unit 15 pcs mating outlets/connectors category / description connector overview complete iec connector c19, rewireable, straight 4795 iec connector c19, rewireable, angled 4790 iec connector c19, rewireable, straight 0104u connector further types to 6136 power supply cord overview complete cord sets 16 a, europlug, 2.5 m, connector iec c19, h05vv-f3g1.5, black 6004.0395 cord sets 16 a, interconnection, 1.0 m, connector iec c19, h05vv-f3g1.5, black 6020.0392 cord sets 16 a, interconnection, 2.0 m, connector iec c19, h05vv-f3g1.5, black 6020.0394 cord sets 16 a, north america, 2.5 m, connector iec c19, sjt 3x14 awg, black 6009.5195 power supply cord further types to 6136 mating outlets/connectors shuttered power cord overview complete overview power cord with iec appliance connector c19, v-lock, straight vac19ks power cord further types to 6136 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 16.02.2018
|
